Float bowl stand off replacement

New  tube with sealer is driven into heated float bowl with a driver to hold it from collapsing or bending. The end is soft soldered and then drilled. The original length is set by grinding the end of the tube.

New tube with sealer is driven into heated float bowl with a driver to hold it from collapsing or bending. The end is soft soldered and then drilled. The original length is set by grinding the end of the tube.

Float bowl stand off replacement

The brass tubes tend to split lengthwise with age and this is a quick repair i offer. Leaking tube is cut flush at bowl and then drilled for interference fit with new tube.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s